Socket-weld Steel Pipe Flange

Product Detail

Socket Weld Flange

Our socket welding flange is designed for pipelines with small diameter and high working pressure. Generally, the diameter is not greater than 40mm and the working pressure shouldn't exceed 10.0Mpa. The production process of the socket welding flange is similar to that of loose flange. One end of the flange is welded together with pipe, while the other end is connected through thread.

Available Sizes
3/8"~3",DN10~DN80
Standards
GB/T9112-2000 GB/T9117.1-2000 GB/T9117.2-2000 GB/T9117.3-2000 GB/T9117.4-2000 GB/T9124-2000 SH/T3406-1996
HG/T20592-2009,HG/T20614-2009,HG/T20615-2009,HG/T20623-2009,
HG/T20635-2009 ASME B 16.5-2009
EN1092-1-2007 EN1759-1-2004 BS1560-3.1-1989 BS4504-3.1-1989
AFNOR NF E29-200-1-2007
ISO7005-1-1992 JIS B2220-2004
Raw Materials
Carbon steel:A105
Alloy steel:A182F 1-F 2-F 5-F 9-F 10-F 91-F 92-F 122-F 911-F 11-F 12-F 21-F 22
Stainless steel:A182 304-304H-304L-304N-304LN 316-316H-316L-316LN 321-321H 347-347H
Low-temperature steel:A522 A707 Grade L 1-L 2-L 3-L 4-L 5-L 6-L 7-L 8
High-performance steel:A694 F 42-F 46-F 48-F 50-F 52-F 56-F 60-F 65-F 70F
Pressure Grade
American System:CLASS150 CLASS300 CLASS400 CLASS600 CLASS900 CLASS1500
European System:PN2.5,PN6,PN10,PN16,PN25,PN40,PN63,PN100.
Flange Facing
Flat face(FF),Raised face(RF),Tongue face(T),Groove face(G),Female face(F),Male face(M),Ring joints face(RJ).
Producing Process
Cutting of Raw Material-Die Forging-Machining
Application
The flange is widely used in many areas such as power generation plant, petroleum industry,natural gas system,chemical industry,shipbuilding industry,heating system,paper-making industry,metallurgy industry,etc.